Spare Parts

SPS-CA;OPTICAL;LC-SC;15M - 263894-004

Fiber-optic short wave multimode interface cable - 50um core, 125um cladding - LC and SC connectors - 15m (49ft) long (Part Number 263894-004)

SPS-CA;OPTICAL;LC-SC;5M - 263894-003

Fiber-optic short wave multimode interface cable - 50um core, 125um cladding - LC and SC connectors - 5m (16.4ft) long (Part Number 263894-003)

SPS-CA;OPTICAL;LC-SC;2M - 263894-002

Fiber-optic short wave multimode interface cable - 50um core, 125um cladding - LC and SC connectors - 2m (6.6ft) long (Part Number 263894-002)

SPS-SHELF;SLIDING;100 KG;ALL - 263646-001

Sliding shelf (Graphite Black) - Holds up to 100Kg (220lb) - Includes shelf, sliding rails, handle, and a cable guide arm (Part Number 263646-001)

SPS-FAN;CARD CAGE - 263643-001

Fan kit - Includes a 12CFM fan with attached cable, two screws, and two washers (Part Number 263643-001)

SPS-CAGE;DRV;W/SCSI SMPLX BD - 262171-001

Drive Cage with SCSI Simplex Board (Part Number 262171-001)

SPS-RACK;UNIT;10622;22U;GR MET - 261653-001

Compaq Rack 10622 cabinet (Graphite Black) - 22U height, 1.1m (3.6ft) tall, 600mm (2.0ft) wide - Shipped on a standard pallet - Includes cabinet with top cover, side panels, doors, stabilizers, casters, cable management D-rings, and clamps for D-rings...

SPS-BD;SA5i PLUS;SODIMM;64MB - 260741-001

64MB SDRAM Small Outline Dual In-Line Memory Module (SODIMM) - Additional memory for the SmartArray 5i Plus controller (Part Number 260741-001)

SPS-BD;BTRY PK;NMH;4.8V;360MAH - 260740-001

Battery module with integrated charger, Ni-MH, 4.8V, 360mAh - Provides battery backed write cache (BBWC) power for the integrated Smart Array 5i Plus controller (Part Number 260740-001)

SPS-FAN;220V;10000 - 260301-001

Fan assembly (Graphite Black) - 220VAC - For all Rack 9000 series and Rack 10000 series except Rack S10614 - Installed on top cover (Part Number 260301-001)

SPS-PALLET;SHOCK;10000 - 260299-001

Shock pallet - Shock absorbing wooden pallet - Allows shipment with equipment installed in the cabinet (Part Number 260299-001)

SPS-BMPRS;DOOR;GROMMET;10000 - 260296-001

Bumpers - For front and rear doors of Rack 10000 series except Rack S10614 - Includes 10 front door bumpers and four rear door bumpers (Part Number 260296-001)

SPS-STABILIZER;600W;10K - 260294-001

Stabilizer kit (Graphite Black) - For Rack 10622, Rack 10636, Rack 10642, and Rack 10647 - Provides stability and support when equipment is installed, removed, or accessed within the rack (Part Number 260294-001)

SPS-PANELS;SIDE;10642;GR MET - 260293-001

Side panel kit (Graphite Black) - 42U height - For Rack 10642 and Rack 10842 - Includes two panels (Part Number 260293-001)

SPS-BAYING KIT;42U;10K;OFFSET - 260291-001

Offset Baying Kit - For 42U height only - Used to connect Rack 9142 and Rack 10642 together - Includes hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks (Part Number 260291-001)

SPS-PLINTH KIT;10000 - 260290-001

Plinth (base) kit - For Rack 10000 series except Rack 10842 - Base assembly attached to 600mm (23.6in) wide Rack 10000 series (Part Number 260290-001)

SPS-RACK;10642;42U - 260289-001

Compaq Rack 10642 cabinet (Graphite Black) - 42U height, 2.0m (6.6ft) tall, 600mm (2.0ft) wide - Shipped on a standard pallet - Includes cabinet with top cover, doors, casters, cable management D-rings, and clamps for D-rings (Part Number 260289-001)

SPS-RACKTOP;10000 - 260288-001

Top cover kit - For Rack 10622, Rack 10636, Rack 10642, and Rack 10647 - Includes cover, access panel, thumbscrews, and mounting hardware (Part Number 260288-001)

SPS-PROC;1.40GHZ;W/HEATSINK - 259594-001

Intel Pentium III processor - 1.40GHz (Tualatin, 133MHz front side bus, 512KB Level-2 cache) - Includes heat sink (Part Number 259594-001)

SPS-CA;RJ21 TO RJ45 - 259491-001

RJ21 to RJ45 cable (Part Number 259491-001)