Hewlett Packard Enterprise

SPS-CAGE PRI RSR - 877956-001

Primary PCIe riser cage (Part Number 877956-001)

SPS-CAGE PROC - 662537-001

Processor cage assembly - Includes hardware components for the heatsink retaining bracket - Screws to system input-output (I/O)board (Part Number 662537-001)

SPS-CAGE PROC - 691274-001

Processor cage assembly - Includes the pieces to make up the heatsink retaining bracket - Screws to the system I/O board (Part Number 691274-001)

SPS-CAGE REAR 2 SFF/BP 2U - 587382-001

Rear cage - 2U form factor, small form factor (SFF) (Part Number 587382-001)

SPS-CAGE RISER - 662526-001

PCI riser cage - L-shaped metal structure that mounts towards the rear of the server - Capable of mounting two or three PCIe cards depending on which riser board is used (Does not include the riser...

SPS-CAGE RISER - 688037-001

PCI riser cage (secondary) - L-shaped metal structure - For a full height, PCIe, two slot riser board (Part Number 688037-001)

SPS-CAGE RISER GFX - 709860-001

Optional GFX riser cage assembly - For adding a nVidia Q6000 graphics card to the server - Not supported in the 12 LFF and 25 SFF server configurations - Does NOT include the graphics card power...

SPS-CAGE RISER NVMe - 881698-001

Non-Volatile Memory Express (NVMe) riser (Part Number 881698-001)

SPS-CAGE RISER W BRACKET PRIMARY - 684895-001

PCI riser cage - T-shaped metal structure, low profile single slot PCIe riser board - For use with a full height PCIe riser board (Part Number 684895-001)

SPS-CAGE RPS - 685046-001

Redundant Power Supply (RPS) cage - Mounts in the left rear of the chassis - For 'redundant enablement option' upgraded servers only (Part Number 685046-001)

SPS-CAGE USB SENSOR - 687958-001

Front panel cage assembly - Includes front panel grill, and USB connector board - For 8-bay small form factor (SFF) drive model servers - Mounts on the right side of the chassis (Part Number...

SPS-CAGE v2 SFF HDD - 774723-001

Hard drive SFF (small form factor) cage (Part Number 774723-001)

SPS-Cage; 4SFF - P67318-001

SPS-Cage, 4SFF (Part Number P67318-001)

SPS-Cage; 8EDSFF - P67324-001

SPS-Cage, 8EDSFF (Part Number P67324-001)

SPS-Cage; BFLY MOD;TER;2u - P58279-001

SPS-Cage, BFLY MOD,TER,2u (Part Number P58279-001)

SPS-Cage; Drive; 8 Bay - 454365-001

Hard drive cage - For use with eight drive bay models, 3.5-inch Large Form Factor (LFF) (Part Number 454365-001)

SPS-CAGE; DRV; W/FRNT BEZEL - 410295-001

Cage assembly - For hard drive, with front bezel (Part Number 410295-001)

SPS-CAGE; DRV; W/FRNT BEZEL - 410301-001

Hard drive cage assembly - With front bezel (Part Number 410301-001)

SPS-CAGE; DVD OPT DRIVE - 496076-001

Optical drive cage assembly - Includes the optical drive bay and lower air vent - Mounts in the right front of the chassis (Part Number 496076-001)

SPS-CAGE; FAN - 496067-001

Fan cage assembly - Holds the six fan modules - Mounts in the bottom of the chassis between the hard drives and the system I/O board (Part Number 496067-001)