Spare Parts

SPS-FAN CAGE ML350 GEN9 - 780989-001

Fan cage assembly - Includes the four by four fan cage with release latch handle - Mounts between the hard drive cages and the system I/O board (Part Number 780989-001)

SPS-CAGE ASSY 6SCSIe W/PCA GEN9 - 780978-001

Cage assembly 6 SCSIe with PCA - For use with Gen9 servers (Part Number 780978-001)

SPS-HEATSINK PROC ASSY GEN9 - 780977-001

Screw-down type processor heatsink assembly - Screws into studs on the system I/O board (Part Number 780977-001)

SPS-FAN MODULE ASSY GEN9 - 780976-001

Fan module assembly - Includes the fan assembly with release latch (three, four, six, or eight fans are used depending on configuration) (Part Number 780976-001)

SPS-SID CARD MODULE ML350 GEN9 - 780970-001

Systems insight display (SID) module - Includes the SID display, module case, and cable assembly - Mounts in the front top center of rack configured servers or front left center on tower configured servers (Part Number 780970-001)

SPS-PCA RPS x2 GEN9 - 780968-001

2-slot power supply backplane board (standard) - Mounts in the chassis at the back of the power supply cages (Part Number 780968-001)

SPS-M/B W/TRAY GEN9 - 780967-001

System I/O board (motherboard) - Supports Intel Xeon E5-2600 V3 (Haswell) processors - Includes sub pan tray, thermal grease, alcohol pad, and instructions - Processors must be the same spare part number (Part Number 780967-001)

SPS-maPDU 17.3kVA 208V 60A 3PH NA/JP - 780892-001

Managed PDU 17.3kVA, 208V, IEC309 60A, 3-phase input (12xC13/12xC19) North America/Japan (Part Number 780892-001)

SPS-maPDU 14.4kVA 208V 50A 3PH NA/JP - 780891-001

Managed PDU 14.4kVA, 208V, CS8365C 3-phase input (12xC13/12xC19) North America/Japan (Part Number 780891-001)

SPS-maPDU 11kVA 400V 16A 3PH INT - 780890-001

Managed PDU 11kVA, 400V, IEC309 16A 3-phase input (21xC13/3xC19) international (Part Number 780890-001)

SPS-maPDU 8.6kVA 208V 30A 3PH DV NA/JP - 780889-001

Managed PDU 8.6kVA, 208V, L21-30, 3-phase input (20xC13/3xC19/1x NEMA 5-20) North America/Japan (Part Number 780889-001)

SPS-maPDU 8.6kVA 208V 30A 3PH NA/JP - 780888-001

Managed PDU 8.6kVA, 208V, L15-30 3-phase input (18xC13/6xC19), North America/Japan (Part Number 780888-001)

SPS-maPDU 7.3kVA 200-240V 32A INT - 780887-001

Managed PDU 7.3kVA, 200-240V, IEC309 32A, Input (20xC13/4xC19) international (Part Number 780887-001)

SPS-maPDU 4.9kVA 208V 30A NA/JP - 780886-001

Managed PDU 4.9kVA, 208V, L6-30A North America / Japan (Part Number 780886-001)

SPS-maPDU 3.6kVA 200-240V 16A WW - 780885-001

WW managed PDU 3.6kVA, 200-240V detachable C20 input 16A (Part Number 780885-001)

SPS-maPDU 2.8kVA 120V 30A NA/JP - 780884-001

Managed PDU 2.8kVA, 120V, 30A , North America/Japan (Part Number 780884-001)

SPS-LPe 12004 QUAD PORT 8GB HBA - 780676-001

StoreFabric 84E 4-port 8Gb Fibre Channel host bus adapter (Part Number 780676-001)

SPS-GPU Primary Power Cable Long - 780427-001

GPU power cable - 140mm long (5.5 inches) long - Interconnects the graphics accelerator board to the additional power connector on the primary riser board (Part Number 780427-001)

SPS-GPU Secondary Short Cable - 780426-001

GPU power cable - 85mm long (3.3 inches) long - Interconnects the graphics accelerator board to the additional power connector on the secondary riser board (Part Number 780426-001)

SPS-SAS cable to x8 AROC - 780425-001

Mini-SAS x4 cable assembly - 570mm (22.4 inches) long - Connects between the 4-bay large form factor (LFF) backplane and the P440ar controller or the H240ar host bus adapter (Part Number 780425-001)