Spare Parts

SPS-ASSY Cable kit ML10 - 732599-001

Cable kit - Includes 180mm (7.1 inch) long SATA with straight connectors cable assembly and ambient temperature cable assembly (Part Number 732599-001)

SPS-PSU 300W ATX E-star6 Bronze Gamay - 732598-001

300 watt integrated AC power supply - ATX E-star6 style power supply with multiple outputs - Mounts in the top rear of the server - Requires 100-240VAC at 50/60Hz (Part Number 732598-001)

SPS-FRONT PANEL Kit ML10 - 732597-001

Front panel assembly - Includes the front cover (with cut-out for the optical drive), optical drive blank, optical drive EMI shield (used with optical drive blank), and front I/O module assembly (Includes power button, USB connectors, and status LEDs)...

SPS-ASSY HTSNK FAN ML10 - 732596-001

Screw type processor heatsink assembly - Includes the heatsink with integrated cooling fan and cable - Screws to the system I/O board on top of the processor (Part Number 732596-001)

SPS-ASSY System FAN ML10 - 732595-001

System fan assembly - Includes the tubeaxial fan with cable - Mounts to the rear panel of the server (Part Number 732595-001)

SPS-MB ML10 PCA - 732594-001

System I/O board (motherboard) - Includes the system I/O board, thermal grease, and alcohol pad (Part Number 732594-001)

SPS-Assy 2nd HDD enablement ML10 - 732593-001

Second hard drive enablement tray kit - Slide-out tray for adding a second large form factor (LFF) hard drive in the optical drive bay - Includes the tray assembly, 220mm (8.7 inch) long SATA cable, and mounting screws (Part Number 732593-001)

SPS-ASSEMBLY BEZEL 4U W/KEY v2 - 732343-001

Front bezel - Locking front cover with bottom louvered hard drive bay cover and cut-out for the removable drive bays - Covers the hot-plug hard drives, and power switch (Part Number 732343-001)

SPS-PCA HP EN 10Gb 1P 544+FLR-SFP+ Adptr - 731850-001

Adapter board - 10Gb Ethernet, 1-port, 544+FLR, enhanced small-form pluggable (SFP+), hot plug (Part Number 731850-001)

SPS-Cable Kit EM and HDEM - 731151-002

Cable Kit HDEM (Part Number 731151-002)

SPS-LTO HDEM Mag w/Calibration Target - 731150-001

Linear Tape Open (LTO) magazine - With calibration, High Density Expansion Module (HDEM) (Part Number 731150-001)

SPS-Lower Sensor Arm - 731149-001

Lower arm sensor (Part Number 731149-001)

SPS-Upper Sensor Arm - 731148-001

Upper arm sensor (Part Number 731148-001)

SPS-Belt Tower Drive HDEM - 731147-001

Belt tower drive - High Density Expansion Module (HDEM) (Part Number 731147-001)

SPS-BD Control Mgmt Blade V2.0 - 731145-001

Control management blade V2.0 - For HW Rev 1 or Rev 2 library, minimum library firmware is 656H_GS01501 or 680H_GS24401 (Part Number 731145-001)

SPS-BATT PACK NiMH 4.3V 36in - 731126-001

Battery pack - 4.3V NiMH with 914mm (36 inches) long cable - Provides back up power to the Flash-Based Write Cache (FBWC) memory module in the event of a system power failure - For use with Smart Array controllers (Part Number 731126-001)

SPS-BATT PACK NiMH 4.3V 24in - 731125-001

Battery pack - 4.3V NiMH with 610mm (24 inch) long cable - For use with 4GB cache module - Provides back up power to the flash-based write cache (FBWC) memory module in the event of a system power failure - For use with Smart Array controllers (Part...

SPS-Environ Sensor Monitored PDU - 731123-001

Environmental sensor for remote monitored and managed PDU - Hot installable and hot swappable (Part Number 731123-001)

SPS-19.9kVA 480V 30 NA mPDU - 731115-001

Metered Power Distribution Unit (PDU) - 277/480 V three-phase, 19.9kVA, input circuit 30 A, 480 V, three-phase WYE, input plug NEMA L22-30, (30) RF-203P-HPE (LS-26) outlets, North America - Vertical form factor (Part Number 731115-001)

SPS- 16.6kVA 400V 3Ph 24 NA/JP mPDU - 731114-001

Metered Power Distribution Unit (PDU) - 200-240V single phase, 11kVA, input circuit 346?415 V, 16 A, three-phase WYE, input plug EC 60309 32A/30A 5-wire, 12-IEC 60320 C13 outlets, 12-IEC 60320 C19 outlets, North America/Japan - Vertical form factor (Part...