Spare Parts

SPS-CA; PWR HP to ODD - 436539-001

Cable - Power HP to optical disk drive (Part Number 436539-001)

SPS-HARDWARE/PLASTICS; MISC - 436381-001

Hardware and plastics kit - Includes processor blank, conector cover enclosure conectors 1 and 2, and rear access panel support (Part Number 436381-001)

SPS-HEAT SINK - 436380-001

Processor heatsink (Part Number 436380-001)

SPS-COVER; TOP - 436379-001

Access panel (Part Number 436379-001)

SPS-CAGE; HDD; W/LED BD/BEZEL - 436378-001

Cage assembly - For hard drive, with LED and bezel board (Part Number 436378-001)

SPS-BD; BCKPLN; HDD - 436377-001

Hard Drive Disk (HDD) backplane board (Part Number 436377-001)

SPS-BD; SYSTEM I/O - 436376-001

System I/O board (motherboard) - Supports select AMD 82xx and 83xx processors - Includes base pan assembly, alcohol pad, and thermal grease syringe - Processors must be the same spare part number (Part Number 436376-001)

SPS-CA;EXT 12V Y-DONGLE GRAPHICS - 436165-001

SPS-CA,EXT 12V Y-DONGLE GRAPHI (Part Number 436165-001)

SPS-CA;SAS;Power/Data - 436071-001

Power and data cable - For the Serial Attached SCSI (SAS) hard drive backplane board (Part Number 436071-001)

SPS-CHASSIS; 48K DIRECTOR - 435738-001

Chassis assembly - Includes backplane (Part Number 435738-001)

SPS-BD;8-INT;SAS;PCI-X;HBA - 435709-001

Two channel SAS Host Bus Adapter (HBA) with RAID (Installs in PCI-X slot) - Has eight internal ports, two channels, 3.0Gb/sec SAS and 1.5Gb/sec SATA tranfer rate - For use with hot-plug SATA/SAS servers (Part Number 435709-001)

SPS-PANEL SIDE;10647;10KG2 - 435490-001

SPS-PANEL SIDE,10647,10KG2 (Part Number 435490-001)

SPS-RACK;UNIT;10647;10KG2 - 435489-001

10467 rack unit system - 10Kg (lb) capacity (Part Number 435489-001)

SPS-DOOR;REAR;10647;10KG2 - 435488-001

Rear door - 10Kg - For use with 10647 and WG SL390 rack systems (Part Number 435488-001)

SPS-DOOR;FRONT;10647;10KG2 - 435487-001

Front door assembly - For 10647 rack (10000 G2) - Includes hinges, front lock bar, and screws (Part Number 435487-001)

SPS-RACK KIT 1/8 AUTO G2 - 435248-001

1/8 G2 Tape Autoloader rack kit (Part Number 435248-001)

SPS-MAG RIGHT 1/8 AUTO G2 - 435246-001

Right side magazine - For 1/8 G2 tape autoloader (Part Number 435246-001)

SPS-MAG LEFT 1/8 AUTO G2 - 435245-001

Left side magazine - For 1/8 G2 tape autoloader (Part Number 435245-001)

SPS-DRV LTO1HH W/Mod 1/8G2/MSLG3 - 435244-001

Ultrium 232 SCSI internal MSL/autoloader tape drive assembly - LTO1, half-height form factor - Includes sled (Part Number 435244-001)

SPS-CHASSIS 1/8 AUT G2 - 435243-004

SPS-CHASSIS 1/8 AUT G2 (Part Number 435243-004)