Hardware Kit

SPS-CONVERSION KIT - 298337-001

Tower-to-Rack conversion kit. Conversion kits made after May 1999 contain both the original and the new unique mounting brackets and mounting instructions. (Part Number 298337-001)

SPS-PLASTICS KIT;MISC - 289555-001

Plastics Kit - Includes PCI slot release lever, rear PCI lightpipe, PCI lightpipe cover, PCI riser cage door latch, PCI slot 1 thumbscrew with molded cap, and Battery Backed Write Cache (BBWC) Enabler bracket (Part Number 289555-001)

SPS-PLATES;CLUTCH LOCK - 282249-001

Hardware kit - Includes two clutch covers, two clutch cover plates, two lock plates (rack mounting brackets), and two 6-32 x 1/4 screws (Part Number 282249-001)

SPS-HARDWARE KIT;MISC - 272869-001

Hardware kit - Includes power supply filler panel (blank), controller filler panel (blank), and bracket with power switch, cable assembly, green LED, and yellow LED (Part Number 272869-001)

SPS-BAYING KIT;36U;10K;OFFSET - 271739-001

Offset Baying Kit - For 36U height only - Used to connect Rack 9136 and Rack 10636 racks together - Includes hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks (Part Number 271739-001)

SPS-HARDWARE KIT;THUMBSCREWS - 267141-001

Thumbscrew kit - For Rack 10000 series except Rack S10614 - Four thumbscrews for the top access panel and four thumbscrews for the access panel in a rear door (Part Number 267141-001)

SPS-BAYING KIT;42U;10K;OFFSET - 260291-001

Offset Baying Kit - For 42U height only - Used to connect Rack 9142 and Rack 10642 together - Includes hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks (Part Number 260291-001)

SPS-PLASTICS KIT;MISC - 249746-001

Latch Kit - Includes expansion slot latch and base (Blue), expansion slot latch and base (Carbon), PCI retaining clip (Blue), PCI retaining clip (Carbon), memory board guide, and front bezel retainer (Part Number 249746-001)

SPS-PASS THRU EXTENDER;10U - 246727-001

Pass-Through Mechanism (PTM) extender - 10U height - Does not include pass through belt - Attaches to the existing PTM - For StorageWorks MSL5052, MSL5060, and MSL6060 series tape libraries (Part Number 246727-001)

SPS-PLASTICS;KEYBD;RR COVER - 229846-001

Plastics kit - Includes palm rest, front bezel for tray, top cover (bezel), and two small covers (clutch covers) (Part Number 229846-001)

SPS-TRAY;METAL - 229843-001

Hardware kit - includes a metal tray for holding the keyboard, a metal cover for the controller board, and a grounding clip (Part Number 229843-001)

SPS-HDRWRE KIT;MISC - 228527-001

Hardware Kit - Includes three PCI expansion slot covers, four T-15 flathead screws, and six 6-32 x 0.2-inch screws (Part Number 228527-001)

SPS-BRKT;WSCSI CONN 3-4 POS - 212062-001

Wide SCSI connector bracket kit - Includes flat bracket with holes for four connectors, extended bracket with holes for four connectors, PC board extender, PC board slot cover with hole for one SCSI connector, daughter board clip (Part Number 212062-001)

SPS-HRDW;9000 RAQ;SIDEWALLS - 199909-001

Hardware kit - Includes 15 T30 M6 flat head screws, four hanger clips, and a T30 TORX wrench (Part Number 199909-001)

SPS-UPGRADE KIT;HOT PLUG - 188595-001

Hot-plug upgrade kit - Contains cable and drive cage assemblies (Part Number 188595-001)

SPS-PLASTIC KIT;MISC - 178195-001

Plastic hardware kit - Includes hard drive fan air baffle, CPU fan air baffle, PCI retainers, option board retainers, media locking latch (Green), expansion board slot release lever (Port-colored and Beach Gray) (Part Number 178195-001)

SPS-SCREWS;LEVELING;W/PADS - 176241-001

Hardware kit - Includes four leveling screws and four leveling pads (Part Number 176241-001)

SPS-PLASTIC KIT - 159322-001

Baffle kit - Includes CPU fan air baffle and hard drive fan air baffle (Part Number 159322-001)

SPS-HARDWARE KIT - 159321-001

Fan bracket kit - Includes CPU fan bracket (for fan one and two) and I/O fan bracket (for fan three and four) (Part Number 159321-001)

SPS-HARDWARE KIT;MISC - 126984-001

Hardware kit -Includes blanking panels for expansion board,SCSI slot,removable media EMI shield,hotplug drive cage, memoryboard retention bracket, redundant fan slotcover, extended SCSI dividers, processor board support, retainer and cage support brace...